Pro Mag Kit 115v

Pro Mag Kit 115v

$259.95

2500 Tumbler comes with:

  • Heavy Duty Wet/Dry Media Tumbler Base With 6' 115V Power Cord
  • Two 12" Wet/Dry Bowls one with solid lid, one sifter lid
  • One 8 lb container of Green Pyramid Cutting Media
  • One 5 lb container Dri Shine Media
  • Instructions
  • CE CERTIFIED
  • Rated Horsepower 115v - 0.07
Replacement parts may be ordered or you may contact Customer Service for a factory repair quote and RMA number

CLICK HERE FOR REPLACEMENT PARTS FOR PRO MAG 2500

Categories: ,
In stock
SKU
23124r

Your 2500 Twin Vibratory Tumbler has been supplied with 2 general purpose 12” bowls used for wet or dry polishing operations with the Green Cutting Media and DryShine® Media. To impart a highly reflective shine to the tumbled parts proceed next to the DryShine® Media. Use separate bowl for the polishing for the 1200 and 2500 Standard Vibratory Tumblers. There is no need to add any water or polishes as this media is already treated with a polish. DryShine® Media should be tumbled with the parts for at least 6 hours. Tumbling for longer periods will yield a higher shine. Remember to use a ratio of 70% Media to 30% Parts. This dry media will not remove an appreciable amount of material.

Tech Tips
  • Removes rust from metal without losing detail or rounde edges
  • Removes burrs from hardware stampings
  • Polishing difficult to reach surfaces to a high shine
  • Use 1200 tumbler for parts up to 3 " long
  • Use 2500 tumbler for parts up to 5-6" long
Before
After



WARNING: This product can expose you to lead, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.p65warnings.ca.gov

More Information
Part Number 23124R
Motor 2500 TWIN 115 v 60Hz 50W 1.1 Amps
Best Use Use with wet or dry media
Helpful Hint Holds parts up to 6" long
Unit Weight 22 lbs
Pack Carton Size 2.9 cubic feet
Box Measurements 26 x 13 x 15
Bowl Capacity Size .18 cubic feet / 11 lbs of media
Bowl Diameter 12 Inches
Bowl Height To Lid 4.25 Inches
Bowl Width To Shaft 4 Inches

Banner Product