Deburring/Descaling Metal and plastic castings.
- Adjusta-Vibe 40
- Comes in 115V & 230V
- 17 " bowl capacity is .35 cubic feet
- Has a drain
- Designed for heavy duty use to deburr or polish
- Features adjustable amplitude Calibri (Body)
- Rated Horsepower: 115v - 0.38 and 230v - 0.31
Model 40 vibratory machines are compact, yet have a capacity of .35 cubic feet and are equipped with amplitude adjustment, inlet and outlet ports for compound rinsing systems and heavy duty cross-linked 17-inch polyethylene bowl. Noise reducing lids are standard. When steel burnishing is required, use Model AV-40SS. Can use dry or wet media. Noise level 82db.
Shipping weight 51 pounds; shipping volume 5.06 cubic feet, 18” x 27” x 18”.
The working capacity of the Adjusta-Vibe 40 and 40SS is .35 cubic feet, or three gallons.
The working capacity of the model 75 is .75 cubic feet, or approximately 6 gallons.
This capacity includes both the media and the workpieces.
The general rule of thumb is 70% media and 30% parts.
Deburring metal stampings and machined parts.
Descaling metal castings.
Cutting radii on sharp edge of metal parts.
Polishing metal and plastic parts.
WARNING: This product can expose you to lead, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.p65warnings.ca.gov
|Part Number||23026R and 24114R|
|Motor||115v 60Hz 2.5 Amps 287W /// 230v 50Hz 1.0 Amps 220W|
|Best Use||Deburring metal castings|
|Helpful Hint||See PDF instructions|
|Unit Weight||51 lbs|
|Pack Carton Size||5.06 cubic feet|
|Box Measurements||18” x 27” x 18”.|
|Bowl Capacity Size||.35 cubic feet|
|Bowl Diameter||17 inches|
|Bowl Height To Lid||7 Inches|
|Bowl Width To Shaft||4.25 Inches|