CMF-300

CMF-300

As low as $265.17

 

  • CMF-300
  • Mechanical timer, fixed mechanical speed
  • 1-6 rings or capacity up to 50 grams
  • 3” bowl size , Steel pin capacity 30-50 grams (up to 1.75 oz.) depending on the needs of the user and material/parts being finished
  • Use only Stainless Steel Pin media
  • Use with Raytech Compound M Solution
  • 1/32 HP motor in 115 V ( 5 .0 amps)  and 230V ( 3.0 amps )
  • Product dimensions: 6" x 6" x 9"
  • Box dimensions: 7" x 8" x 10"
 
Categories:
In stock
SKU
CMF300

Raytech’s smallest capacity magnetic finisher has a 3-inch (76.2) diameter chamber that finishes the equivalent of 1 to 6 rings. Pin capacity 30-50 grams ( 1.0 – 1.75 ounces ) depending on the needs of the user and material/parts being finished. The CMF-300 has a fixed speed with mechanical timer and molded bowl and cover. Not for use with dry bowls media.

1/32 hp motor, Shipping weight 10 pounds; shipping volume 1.0 cubic feet, 7” x 8” x 10”.

Before
After



WARNING: This product can expose you to lead, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.p65warnings.ca.gov

More Information
Unit Weight 10 lbs
Speed Mechanical timer , not programmable. Fixed mechanical speed with timer. No FWD/REV
Bowl / Chamber Diameter 3 inches /76.2 mm
Rings Capacity 1-6 rings
Turbo Pins Capacity 30-50 grams ( 1.0 – 1.75 ounces ) depending on the needs of the user and material/parts being finished
Motor HP 1/32 RPM 120v 2400 +/-10% RPM 230v 2250 +/-10% RPM
Master Carton Box Measurements 7" x 8" x 10"
Master Carton / Box cu. ft. 1 cubic foot
Helpful Hints for Media/Bowl Use Can only use Stainless Steel Turbo Pin media.
Helpful Hints for Usage Average run time is 30 minutes but inspect after 5 minutes to check progress. Fill bowl with water to fill line and use 4-5 drops of Compound M.

Banner Product